CLUBSPORT PEDALS V3 BRAKE PERFORMANCE Kit

The human body memorizes muscle tension much better than foot position. This is why all car brakes measure the pressure and not the travel. Race and F1 cars have almost no travel at all. This Brake Performance Kit is the perfect upgrade for your ClubSport Pedals V3 (inverted), increasing the brake pressure point feeling​ by reducing the brake pedal travel and providing a higher brake pressure capability. The red and/or green Elastomer springs and the short Polyurethane spring will be installed to the preload screw of the brake unit.​

There are 8 resistance and travel options with the combinations of the red and green Elastomer springs and their two diameters. The PU foam spring is an optional component to set up a lighter start force which will double the amount of possible configurations to 16. The green Elastomer spring is the harder material version. For fine-tuning, two thicker and harder ones (Ø 13mm) as well as a thinner and softer one (Ø 12mm) are included, both 20mm in length. The red Elastomer spring is the slightly softer material version. Also, two thicker and harder ones (Ø 13mm) as well as a thinner and softer one (Ø 12mm) are included, both 20mm in length.

WHAT’S INCLUDED

  • 2x Elastomer spring red Ø13 x 20 mm
  • 1x Elastomer spring red Ø12 x 20 mm
  • 2x Elastomer spring green Ø13 x 20 mm
  • 1x Elastomer spring green Ø12 x 20 mm
  • 1x Polyurethane spring (PU foam) Ø13,5 x 15 mm
  • 1x Lithium grease bottle (only for Elastomer spring)
  • 1x Installation tool (Fix-1) (G)
  • 1x Quick Guide
Unavailable

€29,95
(incl. VAT)

Downloads for CLUBSPORT PEDALS V3 BRAKE PERFORMANCE Kit

What's included

  • 2x Elastomer spring red Ø13 x 20 mm
  • 1x Elastomer spring red Ø12 x 20 mm
  • 2x Elastomer spring green Ø13 x 20 mm
  • 1x Elastomer spring green Ø12 x 20 mm
  • 1x Polyurethane spring (PU foam) Ø13,5 x 15 mm
  • 1x Lithium grease bottle(only for Elastomer spring)
  • 1x Installation tool(Fix-1 (G))
  • 1x Quick Guide